# 3.1. UAV assembling

3.1.1. Open the tripod and confirm that the lock is in place.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FeN5VHNQ3dXcT79TA7S7F%2Fimage.png?alt=media&#x26;token=04501255-71f3-4b8f-b90e-9c585130c93f" alt=""><figcaption></figcaption></figure>

3.1.2. Insert the plug connecting the middle wing to the fuselage

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FsE8H9ckMPfF8pfhyN3Wq%2Fimage.png?alt=media&#x26;token=a38b0acb-e30c-4bad-b106-8d3c1c4f0451" alt=""><figcaption></figcaption></figure>

3.1.3. Fasten the connection latch and tighten the set screw.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FKXQguVONlfz2w1O1oWzH%2Fimage.png?alt=media&#x26;token=d73d5b25-1165-4d3c-a03f-0440e32344cb" alt=""><figcaption></figcaption></figure>

3.1.4. Install the machine arm according to the hole position, then fasten the lock and tighten the fixing screw.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FzCiY5zZvUvxlaPHoSwpZ%2Fimage.png?alt=media&#x26;token=89b99609-85d1-4019-92d5-45df91436fab" alt=""><figcaption></figcaption></figure>

3.1.5. Insert the aileron carbon rod, connect the cable, and fasten the fixing buckle.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FfOa4FGkDX1EkYnniUkOy%2Fimage.png?alt=media&#x26;token=553fb1cc-4ade-4f75-9851-91c4c266563e" alt=""><figcaption></figcaption></figure>

3.1.6. Assemble the tail, lock the buckle, connect the tail to the arm and tighten the fixing nut.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2F1cgJkLbqVn2fYYW09fr4%2Fimage.png?alt=media&#x26;token=1e2bbed2-6cb9-42f3-94a0-2966439b7142" alt=""><figcaption></figcaption></figure>

3.1.7. Install the airspeed tube and antenna.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2F70CEogBo2KP2mnuqli0n%2Fimage.png?alt=media&#x26;token=6e761b61-e2ef-470b-9dbf-be0052e4477b" alt=""><figcaption></figcaption></figure>