2. Install

2.1. Landing gear installation, install the left and right brace, move absorb sleeve (02) as shown in (01) and screw down the opening (03).

2.2. Align the assembled bracket with the corresponding hole on the fuselage.

2.3. Install the 4 arms in accordance with the indicated number , as shown in the figure below. "There is a mark on each arm and install it in according to the mark corresponding.After installation, please check whether it is firm."

2.4. Install the propeller.

2.5. Fix the batteries (2*25000mAh batteries) in the fuselage,and power on according to the cable label,Close the cover and fasten the button.