# Generator ignition take off

1. Connect the igniter to the power supply (3S battery), close the generator ventilation, trigger igniter several times after connected with generator hole

![](/files/QfN1f6aFvpkypaDuse7U)

2\. When you hear a popping sound from the generator and the oil pipe is full of gasoline, you can open the damper to stop the oil suction.Then you can fire up and take off!

![](/files/49xPG9xtEPJFeCAaJ7k9)

{% hint style="danger" %} <mark style="color:red;">**Attention ！**</mark>

<mark style="color:red;">After start the generator,please arm the aircraft and take off within one minute.Do not wait for a long time,otherwise it will cause damage to the backup battery. After start the generator,please arm the aircraft and take off within one minute.Do not wait for a long time,otherwise it will cause damage to the backup battery.After completing the task, please perform the power-off operation in strict accordance with the power-off sequence. Due to the large vibration of the oil engine, please land after about 50 minutes of flight, and check whether all connectors and screws are fastened.</mark>
{% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.yangdaonline.com/yangda-docs/multirotor-user-manual/yd6-1600l-gas-electric-hybrid-hexacopter/generator-ignition-take-o.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.