4. How to connect the camera

Run YDlink, Click “Connect” menu button

  • Enable video stream

Step 1. Input the Network video IP address: rtsp://192.168.2.119/554

Step 2. Click “Open Video” button to connect camera video.

  • Control the gimbal by TCP

Step 1. Enter the IP address 192.168.2.119 and port 2000.

Step 2. Click the “Connect” botton to enable gimbal control.

The gimbal camera model is displayed normally, indicating that the control connection is successful.
Previous3. Network segment settingNext5. How to connect the drone

Last updated