Add cooling liquid
Attention ！！！
Recommend the -25 degreese cooling liquid,connect the 2*backup battery before adding the liquid, make sure the pump is working,please operate in strict accordance with the specified power-on and power-off sequence. Mistakes connect and discounnect will cause the gen-er-ator to burn out.
1. Power the generator cooling pump
1.1 The firse step is to connect No.2(2 backup battery power sources)
1.2 The second step is to connect No.3(the power supply system of the whole machine)
2. Open the coolant injection port and pour in the coolant.
(If the liquid can't absorb by pump, please put the radiator on ground, make sure the coolant injection port is higher than generator)
After filling is complete, close the cover and disconnect the power.
Power off precautions !!!
1. The first step is to disconnect NO.03(the power supply system of the whole machine)
2. The second step is to disconnect No.02(the power supply of 2 backup batteries)
3. Please operate in strict accordance with the power-off sequence, otherwise the generator will be burned! ! !
Last updated