3.1. UAV assembling
Last updated
Last updated
3.1.1. Install the middle section of the wing, connect the relevant cables between the fuselage and the wing and fasten the lock at the connection between the fuselage and the wing.
(Insert the connecting plug according to the color of the connecting wire)
3.1.2. Install the outer wing, connect the relevant cables of the wing and fasten the lock at the connection.
(Insert the connecting plug according to the color of the connecting wire)
3.1.3. Install the empennage, assemble the empennage to the corresponding position and fasten the lock at the connection.
