3. Install

3.1.Find out the arrow on the gimbal which indicating the yaw heading of the payload (i.e. the lens direction when the camera power on), and synchronize with the direction specified by the UAV. Fix one end of the copper cylinder on the screw hole of lower damping board, and use M3 screw to fasten it. According to the provided screw hole dimension you can make suitable mounting holes on the UAV mounting board, and fixes the other end of the copper cylinder on the mounting board of the UAV.

3.2.Connect the control box and the connecting wire and tighten the screws. Connect the other end according to the specific usage scenario.

3.3.Align the camera with the center of the quick release button, align it with the card slot, and turn it in the direction of the lock icon. When you hear a "click" sound, it means the camera is in place.

3.4.To remove the camera, press the button on the quick release part and turn it in the direction of the unlock icon.

3.5.The SD card is on the back of the camera. Just remove the screws on the back.