Interface introduction

1. Air unit

From left to right, the indicator lights are as follows:

  • Master-slave indicator light: It is always on when the device is in the master state, and flashes when the device is in the slave state.

  • Ethernet communication indicator 2: After the device is powered on, it will flash several times quickly for self-test. Flashes according to data traffic during normal operation.

  • Ethernet communication indicator 1: After the device is powered on, it will flash several times quickly for self-test. Flashes according to data traffic during normal operation.

  • Signal strength indicator light: green→yellow→red→dark off, the signal strength changes from strong to weak, and the device loses connection with the master/slave when it goes out.

  • Power indicator light: When it is on, the power supply of the device is normal.

2. Ground unit

Last updated