Specification
Last updated
Last updated
Please make sure that the motor is not stopped by any object during the rotation, if the gimbal is blocked during rotation, please remove the obstruction immediately.
10X zoom camera
Sensor
1/3 inch 4MP CMOS SENSOR
Video output
CVBS and 1080P/60 HDMI
Video recorded
1080P/30 MP4
Focal length
10X optical focal zoom, 4.9-49mm
FOV
Horizontal: 53.2°(Wide end) ~ 5.65°(Tele end)
Vertical: 39.8°(wide end) ~ 4.2°(tele end)
Focus: 66.6°(wide end) ~ 7.2°(tele end)
Wide Dynamic
Up to 105dB
Auto focus
Less than 1S
Low illumination
0.05lux@F1.6
Aperture
Φ 12.0
Vertical Roll / Horizon Mirror/Static
Support
AWB/AGC/ACC/
Support
Gimbal system
Input voltage
3S-4S
Rotate range
Pitch: ±90° Roll: ±45° Yaw: ±150°
Angle amount of jitter
Pitch and roll: ±0.02° Yaw:±0.03°
Control interface
PWM, S.Bus, and serial command
Working Current
Static current: 240mA(@12V)
Dynamic current: 320mA(@12V)
Mechanical feature
Total weight (gimbal and camera)
430g
Working temperature
-25°~ +60°
[1] Control box
[2] Damping ball
[3] Upper damping board
[4] Lower damping board
[5] YAW axis motor
[6] Roll axis motor
[7] Pitch axis motor
[8] HD zoom camera
[9] Camera mounting based