# 3.1. UAV assembling

3.1.1. Install the middle section of the wing, and the wing and fasten the lock at the connection between the fuselage and the wing.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FLIJ3J5gixvIbFU0SBLZ0%2Fimage.png?alt=media&#x26;token=c02dbda3-08ba-40fe-97b0-b51748215bbd" alt=""><figcaption></figcaption></figure>

3.1.2. Install the outer wing, and fasten the lock at the connection.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FT0KsoB4ajfBc15h5BOU1%2Fimage.png?alt=media&#x26;token=aa790730-4c06-4245-91a9-96993c90f78f" alt=""><figcaption></figcaption></figure>

3.1.3. Install the empennage, assemble the empennage to the corresponding position and fasten the lock at the connection.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FKmzFuS75zuwumAvcE8nJ%2Fimage.png?alt=media&#x26;token=7593cbdc-c465-41e5-a8a7-ddab45b3eb16" alt=""><figcaption></figcaption></figure>