# 4.1.  Set IP

#### 4.1.1. Note: If you want the camera to output images normally, you must connect the network port.

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2Fu4PVv6Ey3neFf4eOPJpH%2Fimage.png?alt=media&#x26;token=22e9b0be-a5f2-41c5-a294-4b6406bcb63e" alt=""><figcaption></figcaption></figure>

After all cables are connected, power on the camera and wait for the camera to complete the self-check. (When you hear the ding-ding-ding sound, it means the camera has completed the self-check.)

#### 4.1.2. Configure PC LAN IP address to the same IP segment as gimbal camera.

(Note:The last number of PC ip address should be different with the last number of camera IP address)

<figure><img src="https://1851866520-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FIWx9bMxy88NRLPUcOemU%2Fuploads%2FxjyrijwTrv7xCrxxmWR6%2Fimage.png?alt=media&#x26;token=5a4c3632-14b7-4be8-b266-cb6fd545bbc0" alt=""><figcaption></figcaption></figure>