Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.

4.4. Use the TTL port to connect and control

Scenario 1: Connect directly without using video & data Link equipment.

Scenario 2: Connect via devices such as video & data Link, and use the TTL connection method for control.

After the connection is completed, perform image connection and control on YDlink. Step 1. Chose the COM port and Baudrate 115200. Step 2. Click the “Connect” botton to enable gimbal control.

Previous4.3. Use the ETH port to connect and controlNext4.5. Use the S.bus port to control

Last updated