# 4.1.  Set IP

#### 4.1.1. Note: If you want the camera to output images normally, you must connect the network port.

<figure><img src="/files/29h0Eh0TXIu9dKXCbsxy" alt=""><figcaption></figcaption></figure>

After all cables are connected, power on the camera and wait for the camera to complete the self-check. (When you hear the ding-ding-ding sound, it means the camera has completed the self-check.)

#### 4.1.2. Configure PC LAN IP address to the same IP segment as gimbal camera.

(Note:The last number of PC ip address should be different with the last number of camera IP address)

<figure><img src="/files/YA9RlU8IikVKD24zxGwz" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.yangdaonline.com/yangda-docs/gimbal-camera-user-manual/sky-eye-series-zoom-camera/sky-eye-3ht-mu/4.-connect/4.1.-set-ip.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.